二维码入口
帮助中心
高级搜索:
当前位置:丝印特印网 > 产品信息 > 产品供应 > 上海供应电镀陶瓷油墨-陶瓷电镀油墨-电镀油墨系列-
上海凯贤印刷科技有限公司
产品分类
这个家伙很懒,产品没有分类!
推荐产品
暂无推荐产品
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 
上海供..
 

上海供应电镀陶瓷油墨-陶瓷电镀油墨-电镀油墨系列-

分享到:
订货量:
价格(不含发票):
1
面议
产品类别:
油墨颜料
供应数量:
不限
有 效 期:
180
发布时间:
2012-08-28
所 在 地:
上海
联 系 人:
赵菁
详细信息
联系方式

产品名称:欧莱斯HAC电镀强化油墨


HAC系列双组份电镀强化油墨

适用范围:

HAC系列双组份电镀强化油墨是专为手机、MP4、彩电及各种家用电器开发的一款高品质视窗油墨,主要用于PMMA、PC、PET等电镀面及强化材料,具有特慢干、高遮盖、高附着力之特点。

性能:过网性能好、耐酒精、抗刮、切割不脱落。

使用方法:

1.H1固化剂的添加为10%;

   2 .将油墨与固化剂配好后,加适量的开油水搅拌均匀;

   3.强制干燥、烤箱温度与时间长短有关一般60-80℃烘烤40-60分钟。

测试方法(完全干燥后):

    1.3m胶纸粘在油墨表面,45度角迅速拉起不脱油;

    2.纯度99%的酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉50次无脱色;

    3.耐磨:1cm橡皮檫500g力水平来回擦100次。

注意事项:

   1.加过硬化剂的油墨应尽量在2个钟内用完,最好是估计半个工作日能用多少就配好多少油;

   2.用剩的油墨不能倒入未配的油墨里,以免硬化;

   3.因电镀件表面情况复杂,故要求客户批量使用之前,自行测试。
Product name: the rice HAC electroplating strengthen ink HAC series two-component electroplating strengthen ink applicable scope: HAC series two-component electroplating strengthen ink is designed for mobile phones, MP4, color TV and all kinds of home appliances development of a high quality Windows printing ink, mainly for the PMMA, PC, PET, electroplating and enhance surface material, with particularly slow dry, high cover, high adhesion characteristic. Performance: over the net good performance, resistance to alcohol, resistance to blow, cut off. Method of use: 1. The H1 curing agent for added 10 � F � � 2. Will ink and curing agent matchs good, adding appropriate open mix the oil and water; 3. Mandatory dry, oven temperature and time length about general 60-80 ℃ baking 40 to 60 minutes. Test method (dry) : 1.3 m tape stick in ink surface, 45 degree Angle quickly pull up not to take off the oil; 2. Purity 99 � and � � alcohol, a kilogram of Jordan farmar cover with cotton cloth in ink surface to pull back and forth force level 50 times no decoloring; 3. Wear-resisting: 1 cm rubber polishing the 500 g force level wipe 100 times back and forth. Note: 1. And the printing ink of stiffening agent should as far as possible in two minutes, use up is best estimate how much can match half a working day much oil; 2. Use the ink can't not left into with the ink, lest hardening; 3. DianDuJian for complex surface, so require customers to batch before use, self test.
联系方式
公司名称:
上海凯贤印刷科技有限公司
联 系 人:
赵菁
电  话:
021-59507952-104
手  机:
传  真:
021-59507635-106
地  址:
  
Q   Q:
QQ交谈
还没有找到合适的产品? 赶快发布求购信息,让供应商主动来找您!收藏此信息
免责声明:以上信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。丝印特印网对此不承担任何责任。
联系我的时候!请说明在丝印特印网上看到的,我好做备案!