二维码入口
帮助中心
高级搜索:
当前位置:丝印特印网 > 产品信息 > 产品供应 > 供应烫印机.热转印机各种服装印花 专业生产制造商
华群机械股份有限公司
产品分类
  烫印机设备
  丝印特印
  
推荐产品
供应烫..
 
供应烫..
 

供应烫印机.热转印机各种服装印花 专业生产制造商

分享到:
订货量:
价格(不含发票):
1
面议
产品类别:
丝印特印设备
供应数量:
1000
有 效 期:
10
发布时间:
2011-03-17
所 在 地:
广东
联 系 人:
吴带群
详细信息
联系方式

欢迎来电咨询


联系人:吴小姐

 

联系电话:13128880464


联系邮件:wudaiqunxiao@***


联系地址:广东省深圳市宝安区观兰镇

 

  温度精度为±3℃。中央压力分配机制•热印板15“× 15”。国际电压,110伏特,240伏特。65度角开放。有全新的温度控制系统。

 本机可将任何彩色色标、人像照片、风景图案及个性化图案等烤制在帽子上,特别适合用作广告、礼品、宣传活动、个性化物品等行业。
产品特点;

●全数字化显示,时间准确度高;
●PID微电脑控制,无须放置定型杯,直接升温;
●铂金热电阻感温,控温更精确( 3℃);
●外观时尚美观
操作流程:
1 启动电源开关,电源指示灯指示;
2 合上压力手柄(调整压力适中);
3 将温控器调至所需温度,温度达到设定值时指示灯熄灭,


即可以开始工作;
4 将定时器调至所需时间;
5 将转印帽子放在下烫板上,再放上烫画纸(请注意烫画纸的正反面),将手柄向下压直至终点;
6 烫印时间控制时间到时,蜂鸣器响,即将手柄向上提起至原位。
维护事项:
1.压力:如压力不够或太大,请先松动调压螺丝,然后转动调压螺母调节压力大小,调节完毕后上紧锁定调压螺丝;
2.温度:当设备到达设定温度后发热板不发热,请检查温控器接线同时确认热电偶是否有损坏(温控器0℃时大约在15分钟到达180℃);
3.时间:设定时间到达不警报(蜂鸣器不响)或警报不断(蜂鸣器不停止),请检查机尾箱内的微动开关接触点是否距离适中,如有导常请调整到适当位置;
Temperature accuracy is ± 3 ℃. Central pressure of thermal printing plate allocation mechanism • 15 "× 15". International voltage, 110 volts, 240 volts. 65 degrees open. A new temperature control system. This machine can be any color color, portrait photo, landscape design and personalized designs and other baked in their hats, particularly suitable for advertising, gifts, promotional activities, personal items and other industries.

 Features; ● all-digital display, time, high accuracy; ● PID microprocessor control, no need to place the cup shape, direct heating; ● temperature platinum resistance thermometers, temperature control is more accurate (3 ℃); ● stylish and beautiful operation process: 1 Turn on the power switch, power indicator instructions; 2 in the pressure handle (adjust the pressure medium); 3 the thermostat adjusted to the desired temperature, the temperature reaches the set value, light is off,Be able to start work; 4 will be adjusted to the time required for the timer; 5 under the transfer cap on the hot plate, and put on transfer paper (transfer paper, please note the positive and negative), the downward pressure until the end of the handle ; 6 to transfer time to control the time when the buzzer sounds, lift the handle to be in situ.

联系方式
公司名称:
华群机械股份有限公司
联 系 人:
吴带群
电  话:
13128880464
手  机:
传  真:
0755-27000000
地  址:
  
Q   Q:
QQ交谈
还没有找到合适的产品? 赶快发布求购信息,让供应商主动来找您!收藏此信息
免责声明:以上信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。丝印特印网对此不承担任何责任。
联系我的时候!请说明在丝印特印网上看到的,我好做备案!