二维码入口
帮助中心
高级搜索:
当前位置:丝印特印网 > 产品信息 > 产品供应 > 阳极氧化金属移印油墨
上海兆恬实业有限公司
产品分类
  金属油墨
  PE油墨
  PP油墨
  UV油墨
  电镀油墨
  陶瓷油墨
推荐产品
阳极氧..
 
阳极氧..
 
耐汽油..
 
阳极氧..
 
耐酸碱..
 
耐酒精..
 
单组份..
 
免烘烤..
 
自干氧..
 
氧化铝..
 
耐酸碱..
 
免烘烤..
 
阳极氧..
 
阳极氧..
 
移印免..
 
丝印免..
 
移印自..
 
丝印自..
 
耐汽油..
 
氧化铝..
 
免处理..
 
移印P..
 
丝印P..
 
免处理..
 
LDPE丝..
 

阳极氧化金属移印油墨

分享到:
订货量:
价格(不含发票):
1
180元/kg
产品类别:
油墨颜料
供应数量:
不限
有 效 期:
0
发布时间:
2021-04-14
所 在 地:
上海
联 系 人:
赵国明
详细信息
联系方式

阳极氧化铝金属移印油墨销售厂家!!!


PE电镀强化系列油墨 油墨特性:主要用于电镀表面、强化表面、真空电镀表面.PU表面.UV表面等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 
Oles MPE Plating Ink

MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.

联系方式
公司名称:
上海兆恬实业有限公司
联 系 人:
赵国明
电  话:
021-59507952
手  机:
19110524835
传  真:
021-59507635
地  址:
  
Q   Q:
QQ交谈
还没有找到合适的产品? 赶快发布求购信息,让供应商主动来找您!收藏此信息
免责声明:以上信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。丝印特印网对此不承担任何责任。
联系我的时候!请说明在丝印特印网上看到的,我好做备案!