二维码入口
帮助中心
高级搜索:
当前位置:丝印特印网 > 产品信息 > 产品供应 > 单组份PE免处理油墨
昆山和必旺贸易有限公司
产品分类
  塑料油墨
  UV油墨
  金属油墨
  陶瓷油墨
  玻璃油墨
  电镀油墨
  特种油墨
推荐产品
耐酒精..
 
免烘烤..
 
耐酒精..
 
PVC金..
 
高耐磨..
 
丝印高..
 
单组份..
 
单组份..
 
高遮盖..
 
丝印A..
 
高遮盖..
 
丝印耐..
 
耐酸碱..
 
免处理..
 
耐酒精..
 
耐汽油..
 
耐丙酮..
 
耐酒精..
 
耐酒精..
 
丝印高..
 
单组份..
 
单组份..
 
耐弯曲..
 
抗刮伤..
 
耐冲压..
 

单组份PE免处理油墨

分享到:
订货量:
价格(不含发票):
1
160元/kg
产品类别:
油墨颜料
供应数量:
1000
有 效 期:
0
发布时间:
2022-10-10
所 在 地:
江苏
联 系 人:
赵涵
详细信息
联系方式

欧莱斯单组份PE免处理油墨

色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 

  印刷:丝印移印均可。 

  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 

  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 

   

  测试方法(完全干燥后): 

  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 

  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 

  3、耐磨:橡皮擦500g力水平来回擦500次。 

   

  使用方法: 

  1、使用前应充分搅拌,用后随时封闭; 

  2、搅拌时加开油水10-15%,稀释到印刷粘度; 

  3、网板塞网时可用洗网水清洗; 

  4、不得与其它类型油墨混合使用。 

   

  注意事项: 

  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 

  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 

  3、环境温度过高,将会影响油墨原有质量; 

  4、根据气候变化,请远离火源,阴暗环境下存放。

    5、技术参考数见下表:

       检验项目 检验结果 测试条件 

       油墨线度 ≤12um 刮板细度计 

       干膜光泽 ≥65° 60°镜面光泽计 

       干燥速度 表干 25℃×5-10min 或60℃×2-3min 

       实干 25℃12Hr或60℃×10min 

       耐酒精性 无变化 500克力/cm2酒精棉200次来回 

       附着力 100/100 1mm×1mm×100格3M胶纸剥离 

       耐酸性 无变化 浸泡5%HCI×24Hr 

       耐碱性 无变化 浸泡5%NaOH×24Hr 

       耐盐性 无变化 浸泡5%NaCI×24Hr  

       耐水性 无变化 浸泡20℃自来水×96Hr   

       耐磨性 不见底 500克/cm2负载含砂橡皮200来回 

       耐热性 无变化 80℃×12Hr  


 Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.

Printing: silk screen printing can be.

Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.

Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.

Test method (completely dry):

1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;

2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;

3, wear: the eraser 500g force level wipe 500 times back and forth.

Method of use:

1, before the use should be fully mixing, use at any time after the closure;

2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;

3, mesh plug mesh can be used when washing network water cleaning;

4, shall not be mixed with other types of ink.

The matters needing attention:

1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;

2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;

3, the ambient temperature is too high, it will affect the quality of the original ink;

4, according to the climate change, please stay away from fire, stored in dark environment.

   


联系方式
公司名称:
昆山和必旺贸易有限公司
联 系 人:
赵涵
电  话:
13524738120
手  机:
18485540838
传  真:
86-021-59507635
地  址:
  
Q   Q:
QQ交谈
还没有找到合适的产品? 赶快发布求购信息,让供应商主动来找您!收藏此信息
免责声明:以上信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。丝印特印网对此不承担任何责任。
联系我的时候!请说明在丝印特印网上看到的,我好做备案!