二维码入口
帮助中心
高级搜索:
当前位置:丝印特印网 > 产品信息 > 产品供应 > PET丝印油墨
昆山和必旺贸易有限公司
产品分类
这个家伙很懒,产品没有分类!
推荐产品
耐酒精..
 
烤漆面..
 
烤漆面..
 
移印塑..
 
丝印塑..
 
耐丙酮..
 
耐水煮..
 
耐酒精..
 
免烘烤..
 
免烘烤..
 
电镀强..
 
PE丝印..
 
电镀表..
 
PET丝..
 
PET丝..
 
移印免..
 
丝印免..
 
耐汽油..
 
耐汽油..
 
耐汽油..
 
耐折叠..
 
耐冲压..
 
免烘烤..
 
移印铝..
 
铝合金..
 

PET丝印油墨

分享到:
订货量:
价格(不含发票):
1
160元/kg
产品类别:
油墨颜料
供应数量:
10000
有 效 期:
0
发布时间:
2023-03-02
所 在 地:
上海
联 系 人:
赵菁
详细信息
联系方式

一、

油墨使用技术参考适用范围:各类TPE、TPR、EVA、乙烯基弹性体、橡胶等烯烃类弹性体。

1、 稀释剂:TPE专用稀释剂。

2、 消泡剂及流平剂:TPE专用消泡剂及流平剂。

3、 硬化剂:无。

4、 油墨调配方法:使用前将油墨搅拌均匀。酌情添加10-30%的稀释剂,再搅拌均匀使用。

5、 包装干燥条件:不低于8小时。

6、 添加硬化剂后的使用时限:无。

7、 油墨重金属含量标准:符合EN71-3标准。

8、 易燃品等级:为二级易燃液体。

9、

用溶剂毒性:低毒。 

二、

油墨使用注意事项1、 试印确认符合要求后再批量生产。

2、 做好被印物的表面清除油脂及杂质工作,以促进附着效果。

3、 需要套色时,应在前颜色表干或硬干后再进行套色工作。

4、 作业完毕后剩余油墨紧闭容器封口。

5、 附着力、硬度、耐酸性、耐油性、耐去渍油性、抗划伤性、耐磨性等性能的检测,需要墨层完全固化后方可检测。

6、 未经允许情况下,不得将本系列油墨与其它类型油墨混用及配色。

7、 当印刷品质出现不良状况时,请向本司技术部咨询,切勿自行处理。

8、 使用方法不当恕不赔偿。

三、

油墨性能检测结果

检测项目检测方法检测标准检测结果粘度托马斯粘度计5000-8000CPSOK细度细度计10UM↓OK干燥条件自然干燥24小时OK附着力(百格)1×10×10MM方格5BOK铅笔硬度中华绘图铅笔2BOK冲击性能抗冲仪器不检测----屈曲性(180度)弯曲试验A,

Ink using technology reference range: all kinds of TPE, TPR, EVA, vinyl elastomer, rubber, etc..

1, diluent: TPE special thinner.

2, anti foaming agent and leveling agent: TPE special agent for foaming agent and leveling agent.

3, hardening agent: No.

4, ink deployment method: before the use of ink mixing evenly. As appropriate, add the 10-30% diluent, and then stir evenly.

5, packing dry condition: no less than 8 hours.

6, the use of the time after the addition of hardening agent: No.

7, ink heavy metal content standard: accord with EN71-3 standard.

8, flammable grade: for the two grade flammable liquid.

9,

Solvent toxicity: low toxicity.

Two,

Ink usage note 1, the test and print confirmation to meet the requirements of mass production.

2, to do a good job of the surface of the printed matter to remove oil and impurities work, to promote the attachment effect.

3, need to register, should be before the color table dry or hard after the registration work.

4, after the operation of the remaining ink closed container sealing.

5, adhesion, hardness, acid resistance, oil resistance, resistance to oil, anti scratch, wear resistance and other properties of the test, the need to completely curing the ink layer can be detected.

6, without permission, may not use the series of ink and other types of ink mixing and matching.

7, when the printing quality is bad, please consult with the technical department, do not deal with it.

8, the use of improper method without compensation.

Three,

Ink performance test results

Test items detection standard test results viscosity viscometer Thomas 5000-8000CPSOK fineness fineness 10um NaBH OK drying conditions natural dry for 24 hours OK adhesion (grid) blunt instrument detection and anti impact properties of 1 x 10 x 10mm square 5BOK pencil hardness of the drawing with a pencil 2BOK ---- buckling (180 degrees) bending test




联系方式
公司名称:
昆山和必旺贸易有限公司
联 系 人:
赵菁
电  话:
18201776975
手  机:
16683850914
传  真:
021-59507635
地  址:
  
Q   Q:
QQ交谈
还没有找到合适的产品? 赶快发布求购信息,让供应商主动来找您!收藏此信息
免责声明:以上信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。丝印特印网对此不承担任何责任。
联系我的时候!请说明在丝印特印网上看到的,我好做备案!